Connecting to a paired Bluetooth
You can stream audio from a Bluetooth
two ways to stream audio from a paired device to your SoundTouch
If there are multiple devices stored in the system's pairing list, it may take a minute
or two for the paired device to connect. Your system's display indicates connection
status.
Using the
1.
On the system's button pad or remote control, press and release
until a Bluetooth connecting message appears on the display.
The system connects to the last device that streamed to your system.
2.
On the device, play music.
Tip: If a paired device is connected, you do not need to press
If you cannot stream audio from a paired device
Your SoundTouch
system's display. If the paired device is out of range of your system, move the
device within range.
Using the Bluetooth
1.
On the Bluetooth enabled device, turn on the Bluetooth feature.
2.
Select your SoundTouch
3.
Once connected, on the Bluetooth enabled device, play music to stream to
your system.
Clearing the system's Bluetooth
When you pair a Bluetooth enabled device to your system, the connection is stored
in the system's pairing list. You may need to clear the pairing list if you cannot
connect to a device. Once you clear the list, you need to pair previously-paired
devices again.
On the button pad or remote control, press and hold
A message similar to Pairing list cleared appears on the display.
The system is ready to pair to a device (page 19).
button
system may have lost connection to the device. Check the
™
feature on the paired device
®
system from the device list.
™
®
enabled device
enabled device to your system. There are
®
pairing list
®
Bluetooth
system.
™
.
(about 10 seconds).
English - 21
®
Sayfayı Yazdır