23zero TUB RACK Kullanıcı Kılavuzu - Sayfa 9

Otomobil Aksesuarları 23zero TUB RACK için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 23zero TUB RACK 12 sayfaları.

TUB RACK ASSEMBLY MANUAL

Drill holes.

Use 3mm drill bit for pilot hole

followed by 10mm drill bit for

final hole.

Tip: De-bur holes and apply

enamel paint on bare metal to

avoid rust.

Place tub rack on top of ute tub.

Align holes and fit M10 Hex bolts to

all 4 legs.

Once bolts, washers and nuts have

been seated, tighten all.

Vehicle mounting

Fixings used:

8 M10 50mm Hex bolts (F)

4 M10 30mm Hex bolts (H)

12 M10 Nuts (J)

24 M10 Flat washers (L)

12 M10 Spring washers (N)

Remove backing from protective rubbers

and stick down over holes flush with

inside lip.