Menu Item
Display Brightness:
Display Language:
Optical Source:
Optical Input:
Record Out Format:
TV Power:
Send IR Commands:
Receive IR Commands:
Tuner Spacing:
Video Format:
Video Black Level:
Video Output:
Zone 1 Protocol:
Zone 2 Protocol:
System setup menu
The system setup menu contains settings that affect the entire system.
Settings
What each setting does
1 to 7
Determines the brightness level of the media center display (7 = brightest).
English
Presents on-screen display menus in the selected language.
TV / AUX /
Assigns the OPTICAL INPUT to one of the four sources.
VCR / TAPE
/ NONE
–6/–3/0/3/6 Adjusts the optical audio input level to match the input from the other sources.
Original
No processing applied for RECORD DIGITAL OUTPUT.
PCM
Presents 2-channel, mixed-down Pulse Coded Modulation (PCM) on the
RECORD DIGITAL OUTPUT.
Auto
Automatically turns on your TV whenever a video source is selected (TV on/off
detector required).
Manual
You must turn on your TV separately.
Off
No IR commands are sent by your system to control your TV, VCR and AUX
components.
On
Your system sends IR commands for all connected devices. This setting may
be useful to teach LIFESTYLE
Off
IR commands are not received by your system.
On
IR commands from external equipment, such as universal remotes, are
received by your system.
US
Sets channel spacing for AM/FM radio stations to the USA standard.
European
Sets channel spacing for AM/FM radio to the European standard (if available).
NTSC
Sets video format for NTSC monitors.
PAL
Sets video format for PAL monitors.
Normal
Sets the black level appropriate for most TVs.
Extended
Sets a black level that may be preferred for DVD playback on some TVs.
Normal
Provides a video output at the COMPOSITE and S-VIDEO connectors.
YPbPr
Provides component video output using the COMPOSITE and S-VIDEO con-
nectors (component video adapter required).
Normal
Provides the correct output at the SPEAKER ZONE 1 connector for the new
Acoustimass
zone 1.
Legacy
Not used in zone 1 for this system.
Normal
Provides the correct output (variable level) at the SPEAKER ZONE 2 connector
for Bose
®
powered speaker systems, such as Acoustimass 5P and Acousti-
mass 20P.
Legacy
Provides the correct output (fixed level) at the SPEAKER ZONE 2 connector
for other Bose speakers that use the SA-1 LIFESTYLE
AM259776_02_V.pdf • April 23, 2002
Changing System Settings
®
remote commands to other IR remote controls.
®
module that came with your system. Always use "Normal" for
®
amplifier.
33
Sayfayı Yazdır