Bose Aviation Headset X Kullanıcı El Kitabı - Sayfa 13

Kulaklıklar Bose Aviation Headset X için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose Aviation Headset X 36 sayfaları. Owner's guide
Ayrıca Bose Aviation Headset X için: Kullanıcı El Kitabı (36 sayfalar), Hızlı Kurulum Kılavuzu (1 sayfalar), Kullanıcı El Kitabı (16 sayfalar), Kullanıcı El Kitabı (36 sayfalar)

Preparing to use battery power

Figure 9

Optional operation switches

inside the battery compart-

ment

The battery compartment on your headset control model serves two

purposes. In addition to holding the batteries, it contains small

switches (Figure 9) that give you the option to change some of the

factory-set operation defaults for your headset. Refer to "Battery

replacement" on page 28 for information on opening the battery

compartment.

Note: To change switch positions, use a pen or a small, flat-tipped screw-

driver to gently switch the tab.

• Switches 1- 3: Not currently used.

• Switch 4: Set at the factory to enable the smart shutoff function. To

disable smart shutoff, set switch to OFF. With the switch in OFF

position, the ANR system will not turn off until the power button is

depressed and held for at least one second.

Note: The smart shutoff function is designed to detect when the headset is

not in use and shut off ANR to preserve battery power. Smart shutoff turns off

circuitry several minutes after you remove the headset.

• Switch 5: Set to A at the factory for operation with new headsets.

Set it to B if you are installing a portable cable onto an older, exist-

ing Aviation Headset

Note: If you cannot determine the manufacture date of your headset, refer

to "Locate the serial number for your product registration card" on

page 10.

• Switch 6: Set at the factory for mono audio systems (to provide

audio in both ears).

Set it for stereo (ST) if your aircraft has a stereo intercom.

ETTING

OUR

EADSET

C & K

S006

that was manufactured before June, 2003.

EADY FOR