Bose Lifestyle 35 Series II Kullanıcı El Kitabı - Sayfa 9

Kulaklıklar Bose Lifestyle 35 Series II için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose Lifestyle 35 Series II 13 sayfaları. Noise cancelling
Ayrıca Bose Lifestyle 35 Series II için: Kurulum Kılavuzu (42 sayfalar), Kurulum Kılavuzu (36 sayfalar), Kullanıcı El Kitabı (25 sayfalar), Kullanıcı El Kitabı (24 sayfalar), Hızlı Kurulum Kılavuzu (3 sayfalar), Kullanım Kılavuzu (46 sayfalar), Kullanıcı El Kitabı (36 sayfalar), Kullanıcı El Kitabı (32 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Fabrika Ayarlarına Sıfırlama (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı El Kitabı (38 sayfalar)

Sayfayı Yazdır

Bose Lifestyle 35 Series II Kullanıcı El Kitabı

English

Dansk

Troubleshooting

Problem

What to do

Blinking red Status

• Disconnect the unit from the AC power outlet.

LED on either the

• Remove any possible obstruction to ventilation and reposition the unit upright with

SL2 transmitter or

receiver

• If it continues to blink red, check the cable connection between the SL2 receiver and

• If it continues to blink red, unplug the unit from the power outlet and contact Bose

No sound or

• Make sure the audio source is playing and the program selected includes surround

intermittent sound

• Check to be sure both the SL2 transmitter and receiver power packs are properly

• Make sure that cables are properly connected to the SL2 transmitter, the Acoustimass

• Make sure the SL2 transmitter and receiver are no less than 6

• Locate the small opening labeled Reset on the bottom of both the SL2 transmitter and

• Move the receiver, the transmitter, or both so the transmission path between them

Interference with a

• Increase the distance from each SL2 unit to the phone.

wireless (5.8GHz)

• Press the channel button on the phone (if one is provided) to choose a different

phone

Contacting Customer Service

For additional help in solving problems, contact Bose Customer Service. Refer to the address

sheet included in the carton.

Deutsch

Español

clear space around the ventilation openings on each side. If the ventilation was

obstructed, allow the unit a few minutes to cool before reconnecting it to the AC power

outlet.

the surround speakers. Make sure the connections are secure and the cable wires are

not touching each other, which can cause a short circuit. Refer to "Connecting the SL2

receiver" on page 7. Reconnect the unit to the AC power outlet.

Customer Service. Refer to the address list included in the SL2 carton.

sound audio.

plugged into functioning AC power outlets. Refer to "Making the connections" on

page 6.

module, the SL2 receiver, and the surround speakers. The connectors must be

inserted securely in the jacks.

more than 30 feet (9.2 meters) apart.

the SL2 receiver. Using a fine-pointed tool (like a straightened paper clip), press inside

the opening on the transmitter. And, within 30 seconds, in the same way press inside

the opening on the receiver.

does not intersect with large metal objects in your room or other obstructions (like a

fish tank full of water).

channel for phone transmissions.

Français

Italiano

SL2

OUR

Nederlands

Svenska

WIRELESS SURROUND LINK

feet (2 meters) and no