Absen JP8.33 Kullanıcı Kılavuzu - Sayfa 4
Monitör Absen JP8.33 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Absen JP8.33 18 sayfaları.
Sayfayı Yazdır
Beware of Electric Shock!
⚫ To prevent electric shock the device must be properly grounded during
installation. Do not ignore using the grounding plug, or else there is a risk
of electric shock.
⚫ During a lightning storm, please disconnect the device's power supply, or
provide other suitable lightning protection. If the equipment is not in use
for a long time, please unplug the power cord.
⚫ When performing any installation or maintenance work (e.g. removing
the fuses, etc.,) make sure to turn off the master switch.
⚫ Disconnect AC power when the product is not in use, or before
disassembling, or installing the product.
⚫ The AC power used in this product must comply with local building
and electrical codes, and should be equipped with overload and
ground fault protection.
⚫ The main power switch should be installed at a location near the
product and should be clearly visible and easily reached. This way in
case of any failure the power can be promptly disconnected.
⚫ Before using this product check all electrical distribution equipment,
cables and all connected devices, and make sure all meet current
requirements.
⚫ Use appropriate power cords. Please select the appropriate power
cord according to the required power and current capacity, and
ensure the power cord is not damaged, aged or wet. If any
overheating occurs, replace power cord immediately.
⚫ For any other questions, please consult a professional.
Beware of Fire!
⚫ Use a circuit breaker or fuse protection to avoid fire caused by power
supply cables overloading.
⚫
⚫ Maintain good ventilation around the display screen, controller,
power supply and other devices, and keep a minimum 0.1 meter gap with
other objects.
⚫ Do not stick or hang anything on the screen.
⚫ Do not modify the product, do not add or remove parts.
⚫ Do not use the product in case ambient temperature is over 50 ℃.