Drolet ALASKA 2000 Kurulum ve Kullanım Kılavuzu - Sayfa 9

Soba Drolet ALASKA 2000 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Drolet ALASKA 2000 16 sayfaları. Oil burning stove

• Your stove has been design to work with oil #1 or #2. DO NOT USE GASOLINE, CRANKCASE

OIL OR ANY OIL CONTAINING GASOLINE. Drolet Stoves & Fireplaces declines all responsibility

regarding damage cause by using other combustibles.

•

Best results are obtained when using oil #1. Make sure to use oil without impurities wich may plug

filters and valve's orifice. Impurities only give an improper combustion.

BEFORE LIGHTING

• make sure that :

The tank is full;

The isolating valve is open;

• See that the (3) rings are in the right

position. Each of them are stamped A, B

and C (figure 13).

• Make sure that the flow regulating handle is

in the « 0 » position (figure 14b).

• If it's not already done, arm down the valve's

lever located behind the stove (figure 14A).

• Wait for the valve to fill up and let the level

stabilize.

• BEFORE ATTEMPTING TO LIGHT YOUR

STOVE, MAKE SURE THAT THE FLOW

REGULATING HANDLE IS IN THE 0

POSITION.

Figure 14B:

CONSTANT

CONTROL VALVE (CARBURATOR)

OPERATION INSTRUCTIONS

LEVEL

FLOW

Page 8 of 15

Figure 13:

RINGS POSITION

Figure 14B:

ARMING / DEARMING FLOW

CONTROL VALVE (CARBURATOR).