Drolet The Hunter Kullanıcı El Kitabı - Sayfa 4
Setüstü Ocak Drolet The Hunter için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Drolet The Hunter 11 sayfaları. Wood heater and cook stove
Ayrıca Drolet The Hunter için: Kullanıcı El Kitabı (9 sayfalar)
Sayfayı Yazdır
Assembling your HUNTER :
Fig. 1
Floor Protection:
Your stove has to be placed on a non-combustible surface.
specifications must be respected:
NON-COMBUSTIBLE FLOOR PROTECTION
Thickness
1/64" (0.38 mm)
Clearances from combustible material:
Clearances from combustible material as described below must be scrupulously respected
upon installation.
CLEARANCES FROM COMBUSTIBLE MATERIAL
Back wall
48" (1220 mm)
* Height, from stove's cooking surface to ceiling.
Front
protrusion
18" (460 mm)
Side wall
48" (1220 mm)
3
LEGS, HEAT SHIELD and FIRE
BAFFLE
1. Turn the stove upside down;
2. Screw the four (4) legs into place (see
fig. 1);
3. Slide the heat shield between the four
(4) legs and the bottom of your stove.
4. Slide the heat baffle into place (inside
the firebox), just below the flue outlet.
Make sure that that the bumps on the
baffle are facing upward.
NOTE: You must slightly bend the sheet
metal in order to get the heat shield into
place.
The heat shield's cross must be
facing upward.
Side
protrusion
8" (200 mm)
Corners
48" (1220 mm)
The following minimum
Rear
protrusion
8" (200 mm)
Height *
60" (1524 mm)