Dromex ARC ERGOS 28 Hızlı Başlangıç Kılavuzu - Sayfa 3
Motosiklet Aksesuarları Dromex ARC ERGOS 28 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dromex ARC ERGOS 28 3 sayfaları.
Sayfayı Yazdır
Marking
Marking stamped on the helmet shell:
•
- indicates a product intended for work on live equipment;
• Klasa 0 - Class 0 - electrical class for use up to rated mains voltage of
1,000V AC and 1,500V DC;
• EN 50365:2002 - applicable standard "Electrically insulating helmets for use
on low voltage installations
• BSD - identification of the manufacturer
• ErgoS Intec Type name (hard hat)
• ABS - material of helmet shell
• 53 - 63cm, - range of head circumference adjustment
• 20 - 24, -inch range of head circumference adjustment
• EN 397:2012+A1:2012 applicable standard "Industrial safety helmets"
• -40°C - resistance to very low temperatures (down to -40°C);
• LD - resistance to lateral deformation
• MM -resistance to projected droplets of molten metal;
• 440Vac -electric insulation (according to the EN 397 standard);
• ANSI/ISEA Z89.1-2014 -applicable standard "American National Standard for
Industrial Head Protection"
• Type I -protection against shocks at the top of the head, according to the
standard ANSI/ISEA Z89.1
• Class E - electrical class, according to ANSI/ISEA Z89.1
• LT- lower temperature (according to the ANSI/ISEA Z89.1 standard)
• HT - higher temperature (according to the ANSI/ISEA Z89.1 standard)
• CE 1437- marking of conformity with the Directive 89/686/EEC and the
number of the Notified Body leading supervision of quality control system
• LOT NO- XXX serial number
•
www.bsd-dresden.de/ppe
- website address where a declaration of
conformity is available.
Marking stamped on the rear of helmet:
• PROD X/XX - production date (month/year)
• UTIL X/XX - expiry date (month/year)
• Dromex - Dromex branding and logo
Marking on visor:
•
- Dromex branding and logo
•
- indicates the product is intended for work on live equipment
(according to the RFU no 03-025/2012);
• 2C-2 - protection level of the UV filter (BSD ErgoS Power)
• BSD - identification of the manufacturer
• 1 - optical class
• B - resistance to medium-energy impacts
• N - resistance to fogging
• 166 - Reference to EN166, European standard of Personal Eye-Protection
• ATPV= 28 cal/cm2 Arc Thermal Performance Value according to ASTM F2178
• ANSI/ISEA Z87- applicable standard "American National Standard for
Personal Eye and Face Protection Device"
• BSD - identification of the manufacturer
• Z87.1 - American National Standard for Personal Eye and Face Protection
Device"
• + - Resistance to impact according to ANSI/ISEA Z87.1
• U6 - protection level of the UV according to ANSI/ISEA Z87.1
• BSD – identification of the manufacturer
• ErgoS Intec Power - Model of helmet
• Art.: Manufacturing product code
•
Production date of visor (month/year) and lot number (830 832)
Marking stamped on the lower part of the shield - the chin protection:
• BSD - identification of the manufacturer;
• EN 166:2001 - applicable standard "Personal eye protection. Specifications";
• 3 protection - against projected liquid
• 8 protection - against electric arc
• B - resistance to medium-energy impacts.
Markings
Raised marking
Raised marking
>
BSD EN166:2001 38B
75mm
Position:
Position:
• Helmet inner - Centre of chin protector
• Helmet inner - Centre back
Engraved marking
Engraved marking
1000 V
1883
Ergo2 Intec Power
Art.: 7406502
2C-2 BSD 1B - 166
ANSI / ISEA Z87.1
BSD Z87 + U6, 28 cal/cm
55mm
Position:
Position:
• Visor - Top left side of screen
• Visor - Top right side of screen
Raised marking
Raised marking
ErgoS
Intec
BSD
ABS
53-63cm,
20
-24
inch
/
/
7
5
8
8
EN397:2012+A1:2012
-40°C LD MM 440Vac
ANSI/ISEA Z89.1-2014
TYPE I CLASS E LT HT
1437
LOT NO: 0 2 6
www.bsd-dresden.de/ppe
55mm
Position:
Position:
• Helmet inner - Front
• Helmet inner - Back
Production engraved marking
Utility engraved marking
PROD
2/20
Position:
Position:
• Helmet outer - Back left
• Helmet outer - Back right
Printed sticker
60mm
Position:
• Helmet outer - Centre back
<
ABS
13mm
BSD
03/2020
830 832
20mm
Klasa 0
Disposal
EN 50365:2002
All industrial waste should be disposed of correctly per local regulations and
50mm
good disposal practice. Helmet protective devices should be disposed of
considering the hazardous substance they were used for.
Please consider recycling.
UTIL
2/24
Dromex: Unit 1, 1 Blase Road, New Germany, 3620, South Africa
Earmuff attachment
*Note: Dromex does not supply earmuff
attachments for this specific helmet at
present
4 point chin strap
Chin guard
Integrated visor
4 point harness suspension
Rachet liner
T. +27(31) 713 1960 E. [email protected]
www.dromex.co.za
Latest update: 19/02/2021