Drone S9 Kullanıcı Kılavuzu - Sayfa 5

Dronlar Drone S9 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Drone S9 17 sayfaları.

5.0 FLIGHT PREPARATION

5.1 Install the remote battery

5.2 Change the battery of the drone

Charging:

Fully Charged:

5.3 Install the battery into the drone after it's fully charged.

① Insert the battery into the rear of the drone in the right direction (the tab on the battery

should be facing up)

③ Press 'LOCK' to lock the battery with drone; press 'UNLOCK' before taking out the battery.

Tips:

For your safety, please use the original battery and USB cable.

①

② If use fast charge, the electric current may increase sharply and the rubber part may melt.

③ Plug the USB charging cable into a USB charging port on the computer, power bank or

USB adapter(5V/0.5-2A).

④ Free the battery of any sharp objects that could puncture into the battery to avoid risks of

explosions and fire.

⑤ There is continuous beeping sound from the remote when the battery of the remote is low.

The LED on the drone will flash quickly when the battery of the drone is low.

⑥

seconds, the drone will land automatically.

⑦ To extend the battery's lifespan, recharge it at least once every three months if not using it

for long periods of time.

LED light on USB is on

LED light goes off

② Slide the battery all the way in, until it securely slots into place.

3 X 1.5V AA

(Batteries not included)

5V 1-2A

USB Adapter

LOCK

UNLOCK

About 30