Elegoo MARS 3 Manuel - Sayfa 11

3D Yazıcılar Elegoo MARS 3 için çevrimiçi göz atın veya pdf Manuel indirin. Elegoo MARS 3 18 sayfaları.

2 Wash Your Print and Clean the Tank

Once printing is completed please wait until the resin on the build platform doesn' t drop any

more. Loose the rotary knob and remove the build platform. Use scrapper to remove the model

and wash it with 95% degree (or higher) ethyl alcohol if you are using standard resin or ABS-like

resin.

(See picture 9)

（Picture 9）

1 Install ChiTu Box

ELEGOO ChiTu Box is saved in the U Disk. Choose the right version and install it on your computer

or you can download the latest version from

www.elegoo.com/download

if you prefer.

2 How To Use ChiTu Box

After installation completed, run ChiTu software, click File-Open File, then open your own 3D

model ﬁles

(.stl type)

or you can download some samples from our website

www.elegoo.com.

You can control and change the visual angle, size and position of the model by left-clicking the

model and use options on the left menu.