Elegoo MARS 4 Series Kullanıcı Kılavuzu - Sayfa 11

3D Yazıcılar Elegoo MARS 4 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Elegoo MARS 4 Series 20 sayfaları.
Ayrıca Elegoo MARS 4 Series için: Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

2. Wash Your Print and Clean the Tank

After the printing is completed, please wait until the residual resin on the build

platform doesn't drip anymore. Loosen the screw knob and remove the build

platform. Remove the model with the scraper, and wash it with 95% (or higher)

ethyl alcohol if you are using standard resin or ABS-like resin. If you are using water

washable resin, you can directly rinse it with water (the rinsed water should be stored

in a container).

(See Picture 10)

（Picture 10）

1. Install Voxeldance Tango

ELEGOO Voxeldance Tango software is saved in the U Disk. Choose the right version

and install it on your computer, or you can download the latest version from