Elegoo MARS 4 Series Kullanıcı Kılavuzu - Sayfa 11

3D Yazıcılar Elegoo MARS 4 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Elegoo MARS 4 Series 20 sayfaları.
Ayrıca Elegoo MARS 4 Series için: Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

1. Software Installation and Setup

Test Printing

1. Model Printing

Plug the USB air puriﬁer into the USB port

(See Picture

8), then slowly add resin to the

resin tank (do not exceed the MAX line height).

Cover the printer and then insert the U disk

into the printer and select the pre-sliced test

model for printing.

2. Model Processing

After the printing is completed, wait until the resin on the build plate stops dripping, then loosen

the screw knob of the build plate to remove it and remove the model with a scraper. You can use

ELEGOO's cleaning and curing machine to post-process the model.

(Picture 8)

(See Picture 9)

(Picture 9)