ANKA-TECH AJ-718 Hızlı Başlangıç Kılavuzu - Sayfa 2

Güvenlik Sistemi ANKA-TECH AJ-718 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ANKA-TECH AJ-718 2 sayfaları.

We do recommend that you clear any pairing for all the devices before pairing in a group

For AJ interlink series alarms

Press and Hold the control / test button. Release the control / test button When the Green Light Have Flashed

4 Times

1 Short Beep Follow By 1 Long Beep then 1 Short Beep Follow By 1 Long Beep

For the Remote Controller

Press and hold the test button, release the test button when the red light have flashed 4 times

*For Pairing Additional Alarms / Remote Controller, Please Start From

How to Switch On Alarms?

For Heat Alarm AJ-718 Please Go to Image

For Smoke AlarmAJ-761SI4 ,AJ-762SI4, AJ-763SI4,Please Go to Image

For Carbon Monoxide Alarm AJ-83XSI Please Go to Image

For Remote Controller AJ-R1062 Please Go to Image

Choose one to be your main device, press and hold the control button, release the control button when the

green light have flashed 3 times. Please take care not to release the button too early!

(If you choose the remote controller to be main device, press and hold the test button.

Release the test button when the red light have flashed 3 times)

1 Short beep follow by 1 long beep then red light flash continuously (no sound for remote control)

* If you pairing additional devices to the group, you only need to use one of the devices

in the group to link the new device(s) to the exisiting group.

On other device(s), press and hold the control button, release the control button when the green light have

flashed 2 times. (If you choose the remote controller to be pairing device, press and hold

the test button. Release the test button when the red light have flashed 2 times)

1 Short beep follow by 1 long beep then red light flash 2 times (no sound for the remote control)

After pairing all devices, go back to main device and press the control button once to finish group pairing

Press the main device control button once to test the alarm, after 3~4 seconds, the paired devices will activite

and sound the alarm one by one. Press main device & paired devices control button once to cancel test.

Caution : Loud Beeps

Quick Start Guide

How to Clear Pairing on the Device(s)?

ANKA-TECH V5