Anker EUFY T8210 Hızlı Başlangıç Kılavuzu - Sayfa 7
Aksesuarlar Anker EUFY T8210 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Anker EUFY T8210 17 sayfaları. Battery-powered video doorbell (add-on unit)
Sayfayı Yazdır
STEP 5 MOUNTING THE BRACKET
Mount the Doorbell on a Wooden Surface
If you're mounting the doorbell on a wooden surface, you don't need to pre-drill pilot holes. Use
the provided screws to secure the Mounting Bracket on the wall, the Screw Hole Positioning
Card indicates the position of the screw holes.
What is required: screwdriver, Mounting Bracket, 15° Mounting Wedge (Optional), Screw Pack
Mounting Bracket
Phillips-Head Screwdriver
(Attached to 15° Mounting
(User provides it.)
Wedge)
Wall
Mounting
Bracket
Without 15° Mounting Wedge
10 English
15° Mounting
Screw Packs (Spare screws
Wedge (Optional)
and anchors are included.)
Wall
Mounting
Mounting
Wedge
Bracket
With 15° Mounting Wedge
Mount the Doorbell on Surfaces Made Out of Hard Materials
1. If you're mounting the doorbell on a surface made out of hard materials, like brick, concrete,
stucco, drill 2 holes through the Screw Hole Positioning Card with a 15/64"(6mm) drill bit.
2. Insert the provided anchors, and then use the provided long screws to secure the Mounting
Bracket on the wall.
What is required: Power Drill, 15/64"(6 mm) Drill Bit, Mounting Bracket, 15° Mounting
Wedge (Optional), Screw Pack
Power Drill with
Mounting Bracket
1/4" (6.35mm) Drill Bit
15/64"(6 mm) Drill Bit
(Attached to 15° Mounting
(User provides it.)
15° Mounting
Screw Packs (Spare screws
Wedge (Optional)
and anchors are included.)
Wedge)
1
English 11