Anker Nebula Prizm II Pro Kullanıcı Kılavuzu - Sayfa 12
Projektör Anker Nebula Prizm II Pro için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Anker Nebula Prizm II Pro 14 sayfaları.
Sayfayı Yazdır
Notice
This product complies with the radio
interference requirements of the European
Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that
this device is in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EU.For the declaration of
conformity, visit the Web site:
www.seenebula.com.
Due to the used enclosure material, the product
shall only be connected to a USB Interface of
version 2.0 or higher. The connection to so
called power USB is prohibited.
A statement regarding the AC/DC adapter as
disconnect device is missing in the user manual.
The statement shall require a socket outlet that
is installed near equipment and that shall be
easily accessible.
The adapter shall be installed near the
equipment and shall be easily accessible.
Do not use the Device in the environment at
too high or too low temperature, never expose
the Device under strong sunshine or too wet
environment.
The suitable temperature for the product and
accessories is 0°C-40°C.
When charging, please place the device in
an environment that has a normal room
temperature and good ventilation.
It is recommended to charge the device in an
environment with a temperature that ranges
from 5°C~25°C.
Please ensure to use only the charger offered by
the manufacturer. Using unauthorized charger
may cause danger and violate the authorization
of the projector and the guarantee article.
20
D2241_EN_Manual_60X110mm_20181121_V01.indd 20-21
This charger is for indoor use only
The charger type is NSA120EC-19063200,
output voltage/current is 19Vdc/6.32A. The plug
considered as disconnect device of adapter.
RF exposure information: The Maximum
Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm
between the device and the human body.
To maintain compliance with RF exposure
requirement, use product that maintain a 20cm
distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS
Wifi Operating Frequency
Range:2412~2472MHz (2.4G); 5150~5250MHz,
5725~5850 MHz (5G)
Wifi Max Output Power: ??? dBm(2.4G);???
dBm(5G)
BT Operating Frequency Range: 2402~2480
MHz; BT Max Output Power: 8 dBm
5150~5250 MHz can be used indoor only.
The following importer is the responsible party
(contact for EU matters only)
Importer:Anker Technology (UK) Ltd
Importer Address:Suite B, Fairgate House, 205
Kings Road, Tyseley, Birmingham, B11 2AA,
United Kingdom
This product is designed and manufactured with
high quality materials and components, which
can be recycled and reused.
21
2018\12\21 星期五 16:37:40