Ankersmid Sampling AHL Series Kullanıcı Kılavuzu - Sayfa 5

Isıtıcı Ankersmid Sampling AHL Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ankersmid Sampling AHL Series 18 sayfaları. Heated sample lines

D.

Warranty

If the equipment fails, please contact your ANKERSMID SAMPLING dealer.
The warranty is covered for a period of 1 year countable from the first day of delivery
(as also specified in our normal terms and conditions of sale) when the apparatus (*) is
handled and assembled correctly, installed according good craftsmanship, treatment and
use or operation of the equipment.
The warranty covers repair at the factory at no cost, or the replacement at no cost of the
equipment free ex user location. In case of resend or reshipment, the device must be
properly packed or in his original protective packaging or in a sufficient adapted recipient.
NOTE:
Consumables are only covered by this warranty in case of production defaults.
E.

Introduction

The Ankersmid heated lines are for continuously use in gas analysis processes with gases of
high humidity.
With the heated hose system you have acquired a high quality product to be used in
accordance with the relevant standards and regulations as well as the conditions set out
here. It is always our main objective that the products manufactured by us function to your
full satisfaction and meet the desired requirements. To ensure that this can be properly
implemented for your own benefit, please read the following carefully and observe the
instructions concerning installation and operation.
F.1 Serial number
The serial number is mentioned on the type plate on the device.
F.2 Power supply
Depending on the type of application the heated line can be operated on alternating current
of 110-120VAC, 50-60Hz or 230-250VAC, 50-60Hz.
The heated line is standard delivered with 230V wired. In case of 115V needed please
specify with the order.
Ankersmid Sampling
Neerlandweg 21
2610 Wilrijk
Belgium
User Manual AHL, Edition 09/2016
www.ankersmidsampling.com
Page 5 of 18
© Reproduction of this document or its content
is not allowed without permission of Ankersmid.
Technical Details Subject to Change