DROPSA GRIP Kullanım ve Bakım Kılavuzu - Sayfa 9
Yağlama sistemleri DROPSA GRIP için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. DROPSA GRIP 9 sayfaları.
Whenever not utilizing natural base oils compatible with existing health regulations, it is necessary to adjust the mixer
pressure so as to avoid the formation and dispersion of oil mist into the environment.
The mixing pressure is indicatively between 1 bar (14.7 psi ) and 2.5 bar (36.7 psi).
14. CONTRAINDICATIONS
The GRIP panel does not have any particular contraindications except for the following points:
The operator coming into contact with fluid due to breakage/opening of supply tubing.
The operator must be furnished with suitable personal protection clothing/equipment (part VIII – 626 [Safety at Work
legislation]).
Abnormal posture.
Take note of the indications shown in paragraph 6.2.
Contact with oil during filling/maintenance.
The operator must be furnished with suitable personal protection clothing/equipment (part VIII – 626 [Safety at Work
legislation]).
Use of unsuitable lubricants.
Positioning on dirty surface or with poor magnetic adherence.
Main inadmissible fluids.
Lubricants with abrasive additives
Lubricants with silicon based additives
Petrol – solvents – flammable liquids
Corrosive products
Water
Food substances
9
Fluid
Danger
High wear rate of contacted parts
Seizure of the pump
Fire – explosion – damage to seals
Corrosion of the pump– injury to persons
Oxidation of the pump
Contamination of the substances themselves