anko PM-3400 Kullanıcı Kılavuzu - Sayfa 8
Mutfak Aletleri anko PM-3400 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. anko PM-3400 10 sayfaları.
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. It contains no user serviceable parts. Do not try
to repair it yourself. Any servicing requiring disassembly other than cleaning must be
performed by a qualified appliance repair technician.
CARE & CLEANING INSTRUCTIONS
CAUTION: Never immerse the Theatre Popcorn Maker main unit/popcorn chamber,
cord or plug in water or other liquid.
IMPORTANT! Unplug Theatre Popcorn Maker from mains power and allow the
stainless steel kettle to fully cool down before cleaning.
1. The Theatre Popcorn Maker should be cleaned after every use.
2. Remove the crank. Hold the kettle and turn the crank clockwise to detach.
3. Remove the kettle from the motor. Slide each side of the rotating rod up and out of the
brackets on each side of the main unit's popping chamber.
4. Detach the power cord from the kettle's heating element receptacle located at the bottom
rear of the kettle unit.
5. Use a clean kitchen brush and a small dustpan to sweep the floor of the popcorn chamber.
If needed, use a damp soft cloth or kitchen sponge to wipe down and remove any debris
from the main unit's main unit. Dry thoroughly before next use.
WARNING: To prevent scratching, never use abrasive scouring pads, steel wool,
or scouring powders for cleaning.
6. Fill the stainless steel kettle 2/3 full with warm, soapy water. Soak for 15 to 20 minutes
and then
empty. Use a soft cloth or sponge to remove any debris. Rinse thoroughly and dry.
CAUTION: To protect against electrical shock, do not immerse the stainless steel
kettle or plug in water or other liquids. Avoid letting the kettle motor cord
receptacle come into contact with water.
CAUTION: Never place the main unit, any parts or accessories of the Theatre
Popcorn Maker
in the dishwasher.
7. Always attach the Theatre Popcorn Maker's kettle to the motor after cleaning.