Daikin DPS Kurulum Kılavuzu - Sayfa 4

Soğutucu Daikin DPS için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Daikin DPS 6 sayfaları. Space sensor
Ayrıca Daikin DPS için: Kurulum ve Bakım Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Installation

Front Panel

Figure 3: Front Panel Display

The display is standard for all sensors. The functional keys

on the display include the setpoint adjustment buttons and the

tenant override button, as well as a numerical display to view

changes.

Setpoint Buttons

When pressed, the setpoint will display for three to four

seconds. When pressed again, the setpoint will change in one

degree increments. It will only change within the setpoint

range that was ordered.

Tenant Override Button

When the override button is pressed for 3-5 seconds the

tenant override function will be initiated per the MicroTech

III controller. The amount of time that the unit will come out

of the unoccupied mode and operate in the tenant override

mode is adjustable at the unit controller.

Numerical Display

The default display shows current temperature. When the

up/down buttons are pushed, then the display will show and

adjust the current setpoint and hold the display for 3 to 4

seconds. The unit can also be set up to display setpoint only

or for setpoint lockout.

IM 1199