anko HEG20MF Kullanıcı Kılavuzu - Sayfa 9

Fan anko HEG20MF için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. anko HEG20MF 16 sayfaları. 20cm misting fan

3.3

Water Level Sensor

The water tank has a water sensor located in the bottom.

When the water is consumed to the point where the sensor can no longer

detect the water, the Mist Function will automatically turn off.

Refill the water tank with Tap Water only, and press the Mist Button again to

select your desired Mist level.

3.4

• Remove the cable tie from the USB cable and unravel the cable before

operation.

• Place the fan on a flat level surface. (Refer to "Safety Instruction" section for

Do's and Don'ts)

• Insert the large USB plug into a USB power supply (not included) providing

5Vd.c. with a maximum output of 2A.

• Plug the small end of the USB cable directly into the Power Inlet on the back

of the appliance.

Page 9 of 16