anko 42956426 Kullanım Kılavuzu - Sayfa 3

Bebek & Yürümeye Başlayan Çocuk Mobilyaları anko 42956426 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. anko 42956426 8 sayfaları. 2 tone wooden cot

Sayfayı Yazdır
anko 42956426 Kullanım Kılavuzu
To assemble Cot
1
NOTE: Ensure that the bolt
recesses are facing out.
1
Attach both End Panels to one
Side Panel using 4 x 30mm Bolts.
Tighten Until Firm.
4
4
Slide the Mattress Base between
the End Panels.
7
7
Attach the remaining Side Panel
between the End Panels using 4
x 30mm Bolts.
9
9
Attach 2 x Legs to each Leg
Mounting Panel using 4 x 35mm
bolts.
2
2
Cot should now resemble photo
obove.
5
5
Secure the Mattress Base using
4 x 30mm Bolts.
Do not tighten completely.
8
8
Tighten all bolts until firm.
Do not over tighten bolts. Over
tightening bolts can cause panels
to crack.
10
10
Carefully turn the Cot upside
down.
Attach the legs to each end of
the Cot using 5 x 35mm bolts on
each panel.
The cot is now ready for use in high base mode.
3
3
Carefully lay the cot down on the
Side Panel.
6
6
Carefully stand the cot upright.
WARNING:
MATTRESS BASE
'THIS SIDE UP' LABEL
MUST BE FACING
UPWARD WHEN
MATTRESS BASE IS
INSTALLED
11
11
Carefully stand the cot upright.
Check all bolts for firmness,
but do not overtighten to avoid
cracking.
3