Beckmann EMS-8x-TE Series Kullanıcı Kılavuzu - Sayfa 14
Para Sayma Makineleri & Bozuk Para Ayırıcılar Beckmann EMS-8x-TE Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Beckmann EMS-8x-TE Series 20 sayfaları. Coin box
Sayfayı YazdırUser Manual | EMS-8x / EMS-8x-TE | Beckmann GmbH
After switching on the machine, the letters "StA" (StArt) appear in the display for a few seconds
which indicates the initialization of the machine. Then "LDP" appears, which means loading
parameter list. Then the machine is ready for operation.
If "FLr" (Flash error) is displayed, an internal memory error of the machine occured.
If the machine was turned off during a lapse of time and the P32 parameter was set to "on", the last
saved full minute running time is restarted.
To reset the machine with factory default settings, turn it off at first. Then keep the buttons "+" and
"-" pressed simultaneously while switching on the machine.
"
" (default = basic settings) appears in the display.
With parameter P99 details about the software version can be read out. Press + / - to switch
between the subparameters P99-1 to P99-6.
P99-1
Software version
P99-2
Language/coin table
1 = German
2 = English
3 = German_Switzerland
4 = Denmark
5 = Latvia
6 = Norway
7 = Czechia
P99-3
Feature 1
P99-4
Feature 2
P99-5
Feature 3
P99-6
Feature 4
For service purposes or software updates, it is important to know the serial number of the device.
The serial number is either visible on a sticker which is attached on the electronics or it can be
readout by the software: Press and hold the "P" key during power up of the machine, then the 8-
digit serial number will appear in couples (from left to right). The first digit of the couple indicates
the position and the last the individual value.
Example:
Nr.: 00001564 The display shows in sequences:
„1- " -> „2- " -> „3- " -> „4- " -> „5- " -> „6- " -> „7- " -> „8- " -> Start
Page 14