anko SL163E Manuel - Sayfa 12

Elektrikli Süpürge anko SL163E için çevrimiçi göz atın veya pdf Manuel indirin. anko SL163E 20 sayfaları.

12 Safety Devices Operation

NOTE: The motor has an overheating protection device built in.

It will automatically switch off power to the motor if it overheats. e.g. from

blocked nozzles, full dust Canister or uncleaned and blocked filters.

If this happens, turn off the vacuum cleaner and unplug from the power socket,

clean blockage and / or filters and allow to rest for at least 60 minutes which

should be enough time for the motor to cool down.

Important: If the over-temperature device activates and turns the motor off,

and you do not switch off and unplug the appliance from the power point, the

motor will restart automatically after it has cooled down enough to reset the

safety device.

IMPORTANT! NEVER BLOCK ANY VENTS OR OPENINGS.

Empty the Dust Canister before the dust level reaches the MAX line, or when

the suction power is reduced.

To remove the Dust Canister, turn off the power, unplug and

•

disconnect the vacuum hose.

Grip the handle on the Dust Canister, press the

•

Dust Canister Release Button and pull the Dust

Canister forward and out of the housing.

Take the dust container to a dustbin.

•

Press the Trap Door release button inward to release the latch and the

•

trap door will swing open emptying the contents into the bin.

To close the trap door, close it manually until

it clips shut.

Page 12 of 20