anko VCB45-16A Kullanıcı Kılavuzu - Sayfa 10

Elektrikli Süpürge anko VCB45-16A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. anko VCB45-16A 15 sayfaları.

6.2 Suction power control settings

Turning the suction power control button (8) clockwise to increase power and turning

anticlockwise to decrease the power(Fig.1). Please refer to the following recommended

power settings:

MIN: for curtains and delicate fabrics

Medium: for high-pile carpets and textile flooring

MAX: for sturdy rugs and floors

Open the air flow regulator (13) on the handle (12)

in order to regulate the air flow or to clear the objects

blocking the nozzle (Fig.2). Gradually open the air flow

regulator to decrease the suction power.

Combination floor nozzle

The combination floor nozzle (19) has two settings:

brush out and brush in. Press the brush out switch at the

combination nozzle in order to switch the brush out (Fig.3).

Press the brush in switch to retract the brush.

Brush out: wooden floors, titles, marble

Brush in: carpets/textile surfaces

2 in 1 crevice/brush nozzle and upholstery tool

1. Connect the crevice/brush nozzle or upholstery tool to the end of the handle (12)

or to the telescopic suction tube (14).

2. Use the upholstery tool to vacuum upholstery.

3. To clean hard to reach corners keep the nozzle folded and

use it as a crevice nozzle.

4. To use the nozzle as a brush nozzle, pull the brush

section in the direction of the arrow until it locks

in place (Fig.4).

Fig.1

Fig.2

Fig.3

Fig.4