anko 21YX48 Kullanım Talimatları - Sayfa 2
Konuşmacılar anko 21YX48 için çevrimiçi göz atın veya pdf Kullanım Talimatları indirin. anko 21YX48 2 sayfaları. Portable bluetooth speaker
Sayfayı Yazdır
Function overview:
How to use these speaker:
Function Operation
Pause click
button
Play click
button
Next Song press and hold
+
button
-
Previous Song press and hold
button
Volume Up click
+
button – when the
volume is adjusted to maximum you will
hear a tone notification
Volume Down click
-
button
Specifications:
Model No:
21YX48
Version:
V5.0
Support profiles:
A2DP, AVRCP, HFP
Working Distance:
10 meters
Music Time:
12 Hours
LED indicator
Vol-/Prev
Power/Multifunction Button
Microphone
Charge port
Vol+/Next
Power ON / OFF
Power ON
Press and hold power button
2s. Y ou
will hear a voice indication tone
Power OFF
Press and hold power button
2s. Y ou
will hear a voice indication tone
Talk time:
12 Hours
Standby time:
>100 Hours
Charging voltage:
5V d.c.
Charge time:
3 Hours
Pairing window time:
5 minutes
Pairing the speaker with
Bluetooth devices
• Once the speaker is powered on,
it is in pairing mode (LED flashes ) and
will pair to the last paired device
(if available).
• Pair the speaker in Bluetooth menu in
mobile phone and once it is paired, you
can hear a pairing tone and the LED
will flash every few seconds.
Bluetooth Name:
'anko43351329'or
'anko43351312'
Phone calls
• Press
button to pick up/hang up
phone calls.
• Press and hold the
1s reject the
calls.
Playing music
When the speaker connects with the
mobile phone via Bluetooth you can
enjoy music through the speaker
wirelessly.
True wireless mode (for Bluetooth mode only)
Entry TWS mode
Switch both speakers in Bluetooth mode, press
wireless connection; you will hear a pairing tone from two speakers after they connected.
Search the speaker's Bluetooth name on mobile device for Bluetooth connect.
In other case, when one speaker has already connected to a Bluetooth device, you can
also press
button in another speaker (also in Bluetooth mode) to connect them in true
wireless mode.
After the first successful pairing connection, two speakers will connect automatically if both
of them are powered on.
Disable TWS mode
Click
button 3 times on either Bluetooth speakers to disable the TWS mode.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc.,
and any use of such marks by KMART AUSTRALIA is under licence.
Battery Charging
This Bluetooth speaker is powered by
rechargeable Li-ion battery.
Please use the accessory USB cable
to recharge the battery.
• Insert USB charging cable into a
suitable USB port.
• Connect charging cable with the
speaker USB port .
• Indicator LED turns RED to show
battery is charging.
• Indicator LED turns o when
battery is fully charged.
• It takes about 3 hours to fully
charge the battery.
button in either speakers for true