anko 42939740 Hızlı Başlangıç Kılavuzu - Sayfa 4

Konuşmacılar anko 42939740 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. anko 42939740 6 sayfaları. Port bt party speaker

Sayfayı Yazdır

DESCRIPTION OF TRIPOD STAND REMOTE CONTROL

Remote Control Instruction:

1.Before use the remote control, please take off the transparent plastic insulation

sheet from the bottom slot of remote control and keep it.

2.If not intend to use the remote control, please insert back the transparent plastic

insulation sheet to bottom slot of remote control to keep the battery life.

CAUTION:

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type by the technical staff.

SWALLOWING MAY LEAD TO SERIOUS INJURY OR DEATH IN AS LITTLE AS 2 HOURS

DUE TO CHEMICAL BURNS AND POTENTIAL PERFORATION OF THE OESOPHAGUS.

DISPOSE OF USED BATTERIES IMMEDIATELY AND SAFELY.FLAT

BATTERIES CAN STILL BE DANGEROUS.

EXAMINE DEVICES AND MAKE SURE THE BATTERY COMPARTMENT IS CORRECTLY

SECURED, E.G. THAT THE SCREW OR OTHER MECHANICAL FASTENER IS TIGHTENED.

DO NOT USE IF COMPARTMENT IS NOT SECURE

IF YOU SUSPECT YOUR CHILD HAS SWALLOWED OR INSERTED A BUTTON BATTERY,

CALL THE 24HOUR POISONS INFORMATION CENTRE IN AUS ON 131126 OR IN NZ 0800

764 766 OR CONTACT YOUR COUNTRY'S EMERGENCY DEPT.

1.Power On/Off Button

2.Mode Switching+ Button

3.Speed- Button(Gradual Change Mode)

4.Color+ Button(Breath Mode)

5.Color- Button(Breath Mode)

6.Red Color Button

7.Yellow Color Button

8.Demo Button

9.Speed+ Button(Gradual Change Mode)

10.Mode Switching- Button

11.Bright+ Button(Color Mixing Mode)

12.White Color Button

13.Bright- Button(Color Mixing Mode)

14.Purple Color Button

15.Green Color Button

16.Pink Color Button

17.Sky Blue Color Button

Getting Started

Caution:

1. Do not plug or unplug the power cable while you have wet hands.

2. To protect this speaker from alightning storm, or when left unattended and unused

for long periods of time, unplug power cable from the wall outlet.

3. When unplugging the power cord from a wall outlet, always pull on the power plug

only.Never unplug it by pulling the power cord.

Intrenal Battery Level indicator

1. There is a battery indicator symbol on the display panel. Show the battery capacity level.

2. When the battery capacity is low. The battery indicator will show in half.

3. When the battery indicator keep ﬂashing . Battery is almost run out. Please charge the

speaker.

Charging the internal Battery

The speaker comes with a built-in rechargeable, follow the below steps to charge it:

1.Connect the USB power cable (supplied in the accessories) with USB charger

( not supplied in the accessories) to the DC 5V input slot.

2.The battery light indicator will show RED on the rear function panel.

3.If full charged, the RED indicator light will trun off automatically.

Intrenal Battery Level indicator

1.There is a full grid battery indicator symbol keeping static on the right bottom corner of

the display screen, meaning battery capacity is full.

2.If the half grid battery indicator symbol will light on on the left bottom corner of the display

screen, meaning battery capacity is low.

3.If the half grid battery indicator symbol keeping ﬂashing on the left bottom corner of the

display screen, meaning battery capacity is almost running out, please charge the

battery ontime.

Note: please fully charge the product when it is not going to be used for a long time

and charge once a month to keep longer battery life.

Turning ON/OFF the speaker

1.Press the Power ON/OFF & Volume Knob on the rear function panel to power on or off the

Speaker.

2.Press the Power button on the remote control to Standby mode.

Turn ON/OFF the color light of tripod stand

1.Connect the one end of DC connector of the tripod stand with an adapter ( supplied in the

accessories ), then plugin to the 220-240V 50Hz wall socket to power on the tripod stand.

2.Press the POWER button on or off the remote control can control within 5M with 360

degree. The infrared receiver is located on the tripod stand.

3.Disconnect the DC connector and the AC adapter when not in use with the tripod.