anko WBL-005 Kullanıcı Kılavuzu - Sayfa 4

Blender anko WBL-005 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. anko WBL-005 10 sayfaları.

30. Always unplug the appliance before you start cleaning the appliance.

31. For safe operation of the product, always ensure the product assembled correctly before use.

32. Make sure the blade is securely fastened before assembling onto the motor unit.

33. Do not attempt to repair or disassemble the appliance. There are no user-serviceable parts inside the

appliance.

34. Extreme caution is necessary when moving any appliance containing hot liquids.

35. Do not use the cup in microwave.

36. Do not pour hot liquid into the blender as it can be ejected out of the appliance due to a sudden

steaming. Always allow ingredients to cool down before using it on the blender.

37. Care shall be taken when handling the sharp cutting blades, emptying the jug and during cleaning.

38. For cleaning, please refer to CLEANING AND STORAGE section.

39. Always disconnect the appliance from the mains power before approaching or changing parts.

40. The appliance is intended to be used in household and similar applications such as:

- staff kitchen areas in shops, office and other working environments,

- farmhouses,

- by clients in hotels, motels and other residential type environments,

- bed and breakfast type environments.

WARNING! Misuse of the appliance may cause injury!

CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this

appliance must not be supplied through an external switching device, such as a timer, or connected

to a circuit that is regularly switched ON and OFF by the utility.

WARNING: Extension cords are not recommended for use with this product.

IMPORTANT!

To prevent damage to the electric motor, the maximum operating time is 1 minute.

Allow it to rest for at least 3 minutes before using it again. After 5 cycles of operation,

allow the blender (electric motor) to cool down to room temperature, allow it to cool

down for approx. 30 minutes before using it again.