Ankom TDF23 Servis Prosedürü

Ölçüm Cihazları Ankom TDF23 için çevrimiçi göz atın veya pdf Servis Prosedürü indirin. Ankom TDF23 9 sayfaları. Paddle bar replacement

Sayfayı Yazdır

This procedure is to help facilitate the replacement of the TDF23 Paddle Bar Assembly on the ANKOM

Analyzer.

Note: The following items will be sent in a replacement package as part of the TDF23 Paddle Bar Replacement Kit.



New Paddle Bar Assembly



Loctite



1 Shoulder Screw

Prepare the instrument for service.

a. Power off the instrument.

b. Remove the clear back panel of the TDF instrument by

removing the six acorn nuts using a 3/8" nut driver

(provided with the original instrument purchase).

Tilt the instrument forward (if necessary) for easy access

to the back of the TDF.

Unscrew the two black Service Access screws on the

upper right and left sides of the instrument (near the

ends of Clamp Bar A).

b. Remove the four front clamp bars and set them aside.

Clear the area in front and immediately behind the

instrument of any items that might be in the way.

d. Tilt the instrument forward, careful to guide it down

slowly to ensure no tubing gets caught or pinched in the

machine.

ANKOM Technology  2052 O'Neil Road  Email: [email protected] Phone: 315-986-8090  Fax: 315-986-8091

Paddle Bar Replacement

TDF



4 Shims (0.015)



2 Screws #8269



Depth gauge

Service Procedure



5/32" Hex key wrench



3/32" Hex key wrench



1/8" Hex key wrench

6 Acorn Nuts

Service

Access

Screws

Remove

Clamps

Tilt

Forward

TS021

Revised: 01/24/2017

TDF

Dietary Fiber

pg. 1 of 9