Druck UNIK 5000 Kullanım Kılavuzu - Sayfa 12
Su Pompası Druck UNIK 5000 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Druck UNIK 5000 18 sayfaları. Pressure sensing platform
Sayfayı Yazdır
3.3.1 Media Compatibility
The media compatibility of the product is shown in Table 1.
Product
Pressure Range
5000
0 – 200 bar (0 – 2900 psi)
201 – 500 bar (2915 – 7250 psi)
501 – 700 bar (7265 – 10150 psi)
5600
0 – 200 bar (0 – 2900 psi)
201 – 500 bar (2915 – 7250 psi)
501 – 700 bar (7265 – 10150 psi)
Copyright 2022 Baker Hughes Company.
6 | UNIK 5*00 Series–English
Table 1: Media Compatibility
Media Compatibility
Fluids compatible with stainless steel 316L and
Hastelloy C276.
Liquids and group II gases compatible with
stainless steel 316L (and stainless steel 17-4PH
for pressure connector P58 only).
Group II liquids and group II gases compatible
with stainless steel 316L (and stainless steel
17-4PH for pressure connector P58 only).
Notes:
For the wet/dry differential version, negative
pressure port: Fluids compatible with stainless
steel 316L, stainless steel 304, Pyrex, silicon and
structural adhesive.
For pressure connector option PW: immersion
fluid must be compatible with Kynar.
For electrical connector option 3: immersion fluid
must be compatible with polyurethane.
For electrical connector option 4: immersion fluid
must be compatible with Hytrel.
For electrical connector option N: immersion fluid
must be compatible with Kynar.
Fluids compatible with stainless steel 316L (and
Hastelloy C276 for differential versions only).
Liquids and group II gases compatible with
stainless steel 316L.
Group II liquids and group II gases compatible
with stainless steel 316L.
Notes:
For the wet/dry differential version, negative
pressure port: Fluids compatible with stainless
steel 316L, stainless steel 304, Pyrex, silicon and
structural adhesive.
For pressure connector option PW: immersion
fluid must be compatible with Kynar.
For electrical connector options N and P:
immersion fluid must be compatible with Kynar.
For electrical connector options U and V:
immersion fluid must be compatible with TPE-U.
For electrical connector options P and V:
immersion fluid must be compatible with nitrile
butadiene rubber.