Annecy OTTOMAN TV BED Manuel - Sayfa 18
İç Mekan Mobilyaları Annecy OTTOMAN TV BED için çevrimiçi göz atın veya pdf Manuel indirin. Annecy OTTOMAN TV BED 18 sayfaları.
Sayfayı YazdırTV BED SAFETY INFORMATION
GENERAL INFORMATION
It is very important not to place any vessel containing liquids, e.g. drinks or vase of flowers, on top of the TV footboard
which may accidentally spill and enter the TV compartment as this could cause damage to the TV and/or the TV lifting
equipment. If this happens, please contact your retailer.
Do not expose the bed to an undue level of heat - keep away from radiators.
Never allow anyone to sit on the foot end of the bed - keep children well away from moving parts.
To keep bed clean, we recommend that it be wiped over with a slightly dampened cloth or if fabric, use a light vacuum
cleaner; always disconnect power before cleaning.
Supplied with the bed are remote controls to operate the Music system and TV Lift , When you fit your own TV there is a
remote control to operate it as well. All these remotes use batteries - there are no batteries in the rest of the equipment.
There are strict controls for disposal of batteries - your local council can advise on how to safely dispose of them.
Never burn batteries on an open fire as they could explode.
CONNECTION TO SOUND SYSTEM - BT_OPT
Connect all the power & make sure it is switched on. Select BT (Bluetooth) for Music or OPT (Optical) for TV. TV sound will play
through the TV Bed speakers. Note that when switching to BT the picture remains on-screen. BT mode will still work when TV is
lowered into it's rest position in bottom of the footboard. BT connection name is REMO4.9?? (?? depends on the model).
IMPORTANT POWER INFORMATION
It is essential that the Mains Power Lead (15) is connected to an earthed socket be it a wall socket or extension lead otherwise
there is risk of damage or even electric-shock.
The socket providing the power must be accessible at all times in case you need to switch off the power quickly.
During an electrical or lightening storm - disconnect the power completely as a precaution.
Always un-plug the power when going on holiday or when the bed is not used for an extended period.
If you have young children in the home always disconnect the power at the wall socket for extra safety.
Power outlets, extension leads or adapters must not be overloaded beyond their limit - this can result in fire or electric shock.
Leads supplied with this bed, or other approved mains powered extension leads used to power the equipment must not be
placed where they can be walked on - this is dangerous and could lead to accidents.
Do not interfere with or modify any cables already fitted and do not add any extra media leads unless they are routed
through the ducts as shown in Stage 6. All leads must be tightly fixed to back of TV with clips (
Never touch moving parts or any part of the equipment - if something needs to be checked, disconnect the power first.
Do not insert anything into the footboard as this could seriously damage the TV and/or the TV lifting equipment and could, if
done carelessly, cause serious damage or injury.
If the equipment doesn't operate normally or if there is any unusual noises, disconnect the power.
IMPORTANT: Care should be taken when connecting electrical items. If you are in any doubt about the
connections please consult an approved electrician. If you still have a problem please contact your retailer for advice.
TELEVISION INSTALLATION
Please follow the television installation instructions below.
Raise the TV Lift by pressing the Top button of the remote control.
Connect the Aerial & HDMI cable (16&17) by passing down the appropriate duct - see Stage 6.
Connect the TV to the mounting bracket as in Stage 7 or 8, as appropriate.
If necessary mounting bracket can easily be adjusted up or down to align with upper fixing holes on rear of TV.
Connect the TV Power Lead (supplied with TV) by passing plug down one of the ducts, plugging it into the adapter
then into the TV power socket which is on the face of footboard - see Stage 10. This socket is only to be used for the
TV as the supply is not constant.
If required, connect your own media cables through either of the ducts - connect your media equipment when ready.
Please use the cable clips (21) & cable ties (22) to make certain there are no loose wires to snag.
The TV can now be operated following the TV Operation Guide supplied with your TV.
When finished viewing, lower the TV back into the footboard by pressing Down button of the remote control.
The TV will retract into the footboard automatically - power shall be turned off when TV reaches the bottom.
When the Up button is pressed - the TV Lifting Column rises and power to the TV turns back on automatically.
TROUBLE SHOOTING
If your equipment does not operate please check all the power connections from wall to the socket in the footboard.
Make sure TV is switched on. (Note: TV will only work when it is in the up position).
If you cannot resolve an issue or still have a problem or need help, please contact your Retailer for advice.
Occasionally, due to atmospheric conditions or when re-placing the remote control, one needs to re-pair the system.
Turn off all power.
1)
2)
Press up or down button on TV Bed remote control keeping it pressed down.
Turn power back on.
3)
The remote control can now be can be used to raise or lower the TV Lift.
Page 18 of 18
), never hanging loose.