Drucker Diagnostics 614M Operatör El Kitabı - Sayfa 3
Laboratuvar Ekipmanları Drucker Diagnostics 614M için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Drucker Diagnostics 614M 12 sayfaları. 12vdc mobile labaratory centrifuge
Sayfayı Yazdır
Technical Specifications:
General Specifications for the Model 614M Centrifuge
Voltage: ................................................ 13.8V DC
Power: ................................................. 100 Watts
Maximum load: .................................... 6 x 15mL
Maximum Sample Density: .................. 1.15 grams / mL
Nominal Speed (125 mm holders): ...... 3,750 (± 175) RPM
Nominal RCF (125 mm holders): ......... 1,700 xg
Nominal Speed (75/100 mm holders): . 3,850 (± 175) RPM
Nominal RCF (75/100 mm holders): .... 1,450 xg
Environmental Conditions for Use:
- For In-vehicle / Indoors only
- Ambient temperature: ........................ 2°C - 35°C
- Humidity: ........................................... 90% Max
Noise: .................................................. ≤ 65 dB(A)
Dimensions:
- Height: ............................................... 8.75 in (22 cm)
- Width: ................................................ 11.75 in (30 cm)
- Depth: ................................................ 14.00 in (35 cm)
Weight: ................................................ Approximately 12 lbs. (5.4 kg)
Any use other than those specified by the Manufacturer is explicitly prohibited.
* Maximum sample density is 1.15 grams / mL, (water density = 1.0 grams / mL)
Initial Setup Procedure:
If any problems are found during the initial setup procedure, refer
to the troubleshooting section on page 9. For further assistance,
contact Drucker Diagnostics at
1.
Plug the power cord into the automobile's 12V accessory outlet.
2.
Turn the latch counter–clockwise and open the lid.
3.
Spin the rotor by hand; check for free and level rotation.
4.
Close the lid. Rotate the lid knob clockwise to its complete stop position.
5.
Turn the centrifuge on by turning the timer to 10 minutes.
6.
Listen to the centrifuge. A smooth whirring sound should be heard.
After the centrifuge has passed this procedure it is ready for operation.
814-342-6205 or
Page 3
814-692-7661.