DRUID Debut Series Hızlı Başlangıç - Sayfa 2

GPS DRUID Debut Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç indirin. DRUID Debut Series 4 sayfaları. Intelink
Ayrıca DRUID Debut Series için: Hızlı Başlangıç (5 sayfalar)

Sayfayı Yazdır

Getting Started

Step 1: Charge the device (rechargeable devices only)

Place the device under direct sunlight for several hours or longer, depending on the weather.

Note : Avoid placing the device directly on concrete floor, rock or metal surface, especially

in summer, because fast rising temperature of such surface (sometimes could be over

80!) could cause permanent damage to the device. When deployed on animal, however,

the device temperature is influenced by animal body temperature and will not be too high.

Step 2: Turn on the device and deliver settings

We recommend that you always turn on a device with your mobile phone connected to network,

especially for the first time of device initialization.

Note : If you plan to initialize your device in an environment without mobile network, please

make sure you have cached all necessary information in your mobile phone beforehand.

For details, please read " Help > Data Platform > Ecotopia App > Cache Management " on

the datacenter (https://ecotopiago.com/help/en/#/instruction/App/cache_setting).

1）Authorize Bluetooth to Ecotopia App, and log in with your account.

2）Tap INTELINK icon

Those in blue color are detected by App.

3）Tap to select one device, or tap and hold to select multiple devices. Follow the instructions to

turn them on, and deliver the settings to the device.

Note : (1) For some batches of devices, shake a device to see LED blinking (blinking LED

light indicates that INTELINK of the device has been activated), then tap INTELINK icon

and turn on the device before the LED blinking stops. (2) "Setting delivery" is an important

step to initialize your device. By doing this, the device can obtain the fine settings that are

suitable for each sub-model. When your App is connected to network, it will obtain the

correct settings from the cloud server. Without network connection, the App will use the

information you cached in your mobile phone.

Step 3: View the data

Place the device in open space with a sky view, and keep it far from high walls, metal surface,

strong magnet, or liquid surface (like wet floor). This provides a favorable environment for GPS

signal receiving and gateway connection.

The device will start to collect and transmit data, according to its settings. Then you can check the

data on Ecotopia App and data center.

More operations or information, please refer to Help on Ecotopia data center or App.

on App and wait for 15~ 20 seconds. You will see a list of devices.