Drummond Pipet-Aid XL 4-000-205-E Kullanım Kılavuzu - Sayfa 8

Laboratuvar Ekipmanları Drummond Pipet-Aid XL 4-000-205-E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Drummond Pipet-Aid XL 4-000-205-E 8 sayfaları.

Sayfayı Yazdır

Maintenance and Servicing

Keep your Pipet-Aid clean and charged at all times. When not in use, it is appropriate

to keep the unit plugged into the charger. No damage will occur if you are using the

charger supplied.

Drummond Self-locking Filters are provided with all models that use filters.

Replacement part numbers are:

4-000-051

4-000-052

These filters must be replaced if over-pipetting occurs. They protect the handle

components as well as minimize cross contamination of samples and contain two

membrane layers.

On some models, (XP

the unit, plug in the charger and continue using the unit. Charging will take place while

in use. The charger supplied with these two units function as a power supply.

All rechargeable batteries have a limited life span; generally each battery will last

1,000 cycles (charges) and then must be replaced. Battery replacement is a user

function and will not require any special tools; a Phillips screwdriver is all you will need.

Battery Specifications – Pipet-Aid

Cat. No.

4-000-036

500 Parkway, Box 700

Broomall, PA 19008

800/523-7480 • FAX: 610/353-6204

Website: www.drummondsci.com

©Copyright Drummond Scientific Company, 2014, Rev. 3/14 Printed in USA

Pipet-Aid

5 pk

50 pk

and XL) if the battery charge becomes insufficient to operate

Rating

3.6V/750mA Ni-MH

is a registered trademark of Drummond Scientific Company

4-000-051-S

4-000-052-S

5 pk, sterile

50 pk, sterile

For Technical Assistance, call

1-800-523-7480

[email protected]

or e-mail