Absolare Integrated Amplifier Kullanıcı Kılavuzu - Sayfa 4

Amplifikatör Absolare Integrated Amplifier için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Absolare Integrated Amplifier 11 sayfaları.

1. General Description

The Absolare Integrated Amplifier is hybrid design single piece integrated stereo

amplifier. Single ended tube input section is inspired from the Absolare Preamplifier

and output section is all solid-state, dual mono construction. Transformer balanced

(XLR) and unbalanced (RCA) input versions are available.

- Be sure the voltage setting of the unit matches the applied voltage to power

input. Operating voltage is fixed and must only be changed by an authorized service

agent.

- Do not connect unbalanced subwoofer input terminals to speaker outputs!

Absolare Integrated Amplifier has a balanced output stage. Neither of the speaker

output terminals should be connected to ground. Doing so may permanently damage

the amplifier. Please consult your dealer about correct subwoofer connection.

- This unit is not bridgeable.

- Do not short circuit the speaker terminals. The output is protected for short

circuits, but speaker damage may occur from electrical pulses when the connectors

touch to each other.

- Do not touch tubes while operating. Tubes are extremely hot devices and

contain very high voltages.

- Do not open bottom covers.There are no user serviceable parts inside the unit.

ABSOLARE Integrated Amplifier User Manual 1.2