Dry Flush Laveo DF1045 Kullanıcı Kılavuzu - Sayfa 9

Tuvaletler Dry Flush Laveo DF1045 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dry Flush Laveo DF1045 15 sayfaları. Portable toilet

ELECTRICAL CONNECTIONS

The picture to the right shows a close-up

of the Battery Compartment. We have already

discussed the parts that make up this section

on Page 4, but now we will discuss how to

use these components.

The Power Inlet is where the Laveo receives

power from the Battery, or from our optional

AC Power Adapter. The end of the Power

Cable, and AC Power Adapter both use a

round Barrel Style connector. This is the

same sort of cable used to provide power on many laptop computers. We chose

this style of cable for its ease of use. Simply plug it in with no worry of having it

in the right way. WARNING: Never plug in an AC Adapter that is rated for

output above 12 Volts and 5 Amps. Doing so could cause damage to your Laveo,

and could cause a fire.

The Charge Cable is where you will connect your Battery Charger when it is time

to recharge the battery. The Laveo is designed to draw almost no power at all

when the toilet is not in use. We recommend that the Laveo be charged for an hour

or two if the toilet has been sitting for extended periods. If you have been using

your Laveo more steadily it is recommended that you charge the Laveo for an hour

or two each month of use. This recommended charging time will ensure your

Laveo has plenty of power when you need it. Please remember to unplug your

charger after a few hours. If you wish to have your Laveo connected to AC

(standard wall outlet) for power all the time, we suggest purchasing our optional

AC Power Adapter.

To release the Battery from the Battery Compartment: First, unplug the Power

Cable. Next, grab the Power Cable and the Charge Cable in the same hand; with

your other hand, press down the Locking Tab on the Battery Keeper Plate. With

the Tab pressed down, gently pull the cables and battery out of the Battery

Compartment. When putting the Battery back inside the Laveo, the Battery should

be placed on its side with the Battery Connections to the right, and then slid into

the opening with the connection side of the Battery going first.