Anoa EX+ Kullanıcı Kılavuzu - Sayfa 6
Scooter Anoa EX+ için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Anoa EX+ 15 sayfaları. Skutis
Sayfayı YazdırHow to use the product
1) How to assemble
10
Anoa EX / EX+ User Manual
(1) Unpacking the product
Warning
1. Raise the handlebar first, then lift the
body (deck part) with both hands and lift
it slowly to prevent damaging the folding
part.
2. Caution: The inner shaft may be damaged
due to the heavy load, when only lifted by
the handlebar.
(2) Assembling dashboard
1. The dashboard is not attached to the
product at first.
2. Use an Allen key inside the dotted circle
to release the screws.
3. Adjust the position of the dashboard as
shown in the picture. Make sure that
there is sufficient space between the
finger throttle and the front wheel disc
brake lever so that you can use both
quickly and conveniently. Then tighten the
screws again with the Allen key to finish.
2) How to unfold your skutis
Folding lever
height adjustment
lever (QR lever)
Fit to the height
adjust hole
Folding lock
(1) Raise the front bar
To unfold, push the folding lever down
and pull the handlebar up. After the
handlebar is unfolded, raise the folding
lock in the direction of the arrow and fix
it firmly.
(2) Adjusting height of handlebar
Warning
Unlock the height adjustment lever
(QR lever) and adjust the height
of the handlebar. You can choose
between three different heights. After
adjustment, the QR lever must be
locked again.
(3) Unfold the handlebar
To unfold the handlebar, raise it in
the direction of the arrow until it is
locked automatically. After unfolding,
make sure that the folding lock of the
handlebar is properly inserted in the
direction of the arrow as shown in the
picture below.
Anoa EX / EX+ User Manual
11