DryAIR 2250 Operatör El Kitabı - Sayfa 15

Araçlar DryAIR 2250 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. DryAIR 2250 19 sayfaları.

Sayfayı Yazdır

Mechanical Drive Components

Access to the internal mechanical drive components is through the access door. This door must be removed.
Electric Motor
•
The electric motor used to drive the reel is manufactured by Marathon Electric.
No regular maintenance is required.
•
•
Low temperature manual reset thermal protector.
•
Totally enclosed and fully gasketed construction for dirty environments.
•
Make sure that, during operation or storage, the motor is not in prolonged contact
with moisture.
•
Refer to the chart "Table 1- Electric motor features & data", below for motor data.
PRODUCT FEATURE - ENCLOSED HIGH TORQUE MOTOR
Model Number: 56C17F5913
HP:
3/4
RPM:
1725
Volts:
115/208-230
Frame:
56C
Overload:
MANUAL
Mounting:
C-FACE
Table 1 - Electric motor features & data
Gear Box
Gear box specifications
•
HUB CITY - Poweratio 2000, Model HW2042ER (Assy #: 0251-00534)
•
Modified helical worm reducer
•
102:1 gear reduction
•
5/8" input shaft size
•
1" output shaft
CAUTION
Do not operate the unit without ensuring it contains the correct amount of oil. Do not overfill or underfill with oil. Injury to personnel,
unit, or other equipment may result.
Oil should be changed with greater frequency if unit is used in severe environment (dusty or high humidity).
WARNING
Oil, housing, and other components can reach high temperatures during operation, and can cause severe burns. Use extreme care when
removing lubrication plugs and vents while servicing the unit.
See "Maintenance - Gear Box" section of the operators manual for Hub City Gear Box oil filling procedures, service & maintenance.
Setup/Operation
Phase:
1
Mult. Symb.
F1
F.L. Amps
11/5.4-5.5
W ght. Lbs.
30
"C" Dim.
12.32
Foot Notes:
2
S.F.:
1.15
1 - Access door
2 - Marathon electric motor
3 - Hub City gear box
4-2