Anodyne Therapy Freedom 300 Güvenlik Bilgileri ve Uygulama Talimatları - Sayfa 14
Kişisel Bakım Ürünleri Anodyne Therapy Freedom 300 için çevrimiçi göz atın veya pdf Güvenlik Bilgileri ve Uygulama Talimatları indirin. Anodyne Therapy Freedom 300 20 sayfaları.
Ayrıca Anodyne Therapy Freedom 300 için: Manuel (20 sayfalar)
Sayfayı Yazdır
- 1. Table of Contents
- 2. General Warnings and Precautions
- 3. Purpose of Device (Indications for Use)
- 4. Device and Parts Description
- 5. Environmental Conditions Affecting Use
- 6. Set up Instructions
- 7. Operating Instructions
- 8. Treatment Frequency
- 9. Cleaning
- 10. Maintenance
- 11. Storage
- 12. Troubleshooting
- 13. Summary
- 14. Warranty and Return Policy
- 15. Index
m
ainTenanCe
No special maintenance procedures are required, however, proper
care of the Freedom 300 using the following guidelines will extend
the useful life of this product.
1. Be careful not to drop your Control Unit on a hard
surface, step on it or drop a heavy object on it - as this could
damage the circuitry.
2. Do not remove the system Power Supply from an electrical
outlet by pulling the cords.
3. Do not wrap cords around the Foot or Calf Treatment Pads,
Control unit or Power Supply. This may cause the electrical
cords to fray.
5. Do not pull the Foot Treatment Pad, Calf Treatment
Pad along the floor by the cords. This may damage system
components and or cause the electrical cords to fray.
6. When your therapy session is complete, always turn your
system off using the On/Off Switch on the Control Unit and
unplug the Power Supply from the electric outlet.
7. Do not take the Foot or Calf Treatment Pads, or Power Supply
apart or remove any of the cords from their attachment to other
components. Doing so may damage the system components,
prevent the Freedom 300 from working properly and void
product warranty.
s
ToraGe
When not in use, store your Freedom 300 in a cool, dry area away
from access by either children or pets. Storage in a wet or excessively
damp location may cause corrosion of electrical components
or wiring that may result in electrical shock or impair the proper
function of the device.
Otherwise, no special requirements exist for the transport and
storage of the device. The device is shipped in a poly bag as a
precaution from water damage, but this is not a requirement to
transport the device.
14