Anolis ArcWash Recessed 136 RGB Kullanıcı Kılavuzu - Sayfa 15
Işık Fikstürü Anolis ArcWash Recessed 136 RGB için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Anolis ArcWash Recessed 136 RGB 19 sayfaları. Rgb
Sayfayı Yazdır*Both Fade time and Standing time use the same conversion table in order to convert DMX value to the time value:
DMX
Time
[sec.]
1
0.1
2
0.4
5
2.5
10
10
15
22.5
20
40
25
62.5
30
90
35
122.5
40
160
45
202.5
Exact expression of the time value follows the equation: time[sec.]=(DMX value)
MASt. --- Master.Enter this menu if you want to set the the fixture as a master.Use [UP] and [DOWN] buttons to select
desired program and press [ENTER] to confirm selection.
SLA. --- Slave.Select this menu if you want to set the the fixture as a slave.
7.6 Reset function
This option enables the ArcWash 136 RGB to index all effects and return them to their standard positions.
7.7 Special functions
Use this menu for special services like software update.
uPd.M. ---Updating mode.Using this function you can update software in the fixture via PC and serial link.
The following are required in order to update software:
- PC running Windows 95/98/2000/XP or Linux
- DMX Software Uploader
- Flash cable RS232/DMX (No.13050624)
Note1:Software update should execute a qualified person.If you lack qualification, do not attempt the update
yourself and ask for help your ROBE distributor.
Note 2:DMX address, IP address ,programs 1-3 and all functions in menu "PErS" will be set to their default values.
To update software in the fixture:
1.Installation of DMX Software Uploader.
1.DMX Software Uploader program is available from the ROBE web site at WWW.robe.cz.
2.Make a new directory ( e.g. Robe_Uploader) on your hard disk and download the software to it.
3.Unpack the program from the archive. If the Robe fixture is produced in magnetic and electronic
ballast version, name of DMX Software Uploader is the same for both versions.
2.Fixture software updating.
1.Determine which of your COM port is available on your PC and connect it with to the DMX input
of the fixture using the uploading cable. Do not extend this cable! Disconnect the fixture from the
other fixtures in DMX chain! Turn on the computer and the fixture. Make sure the lamp is
switched off.
2.Switch the fixture to the update mode by selecting the option Updating mode in menu Special
Functions on the fixture control panel:SPEC-->UPd-->yES.(From this option you cannot return back
to the main menu. If you do not want to continue in software update, you have to switch off and on the fixture
to leave this option!)
DMX
Time
DMX
[min.]
50
4.2
105
55
5
110
60
115
6
65
120
7
70
125
8.2
75
9.4
130
80
10.7
135
85
140
12
90
145
13.5
95
150
15
100
16.7
155
Time
DMX
Time
[min.]
[min.]
18.4
160
42.7
20.2
165
45.4
170
22
48.2
175
24
51
180
26
54
28.2
185
57
30.4
190
60.2
195
32.7
63.4
200
35
66.7
205
37.5
70
40
210
73.5
2
/10.
15
DMX
Time
[min.]
215
77
220
80.7
225
84.4
230
88.2
235
92
240
96
245
100
250
104
255
108