Anolis ArcPower Micro 270 Kullanıcı Kılavuzu - Sayfa 8

Güç Kaynağı Anolis ArcPower Micro 270 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Anolis ArcPower Micro 270 17 sayfaları.

5.5.Master-slave operation

1.Unplug from the mains before installation.

2.Connect the LED stripes to the fixtures.

3.Connect the DMX output of the master fixture in the data-chain with the DMX input of the first slave. Always

connect output with the input of the next slave until all slaves are connected.Up to 32 fixtures can be connected

in master/slave chain

4.Insert the termination plug (with 120 Ohm) into DMX input of the master fixture and into the DMX output of

the last slave fixture in the link in order to ensure proper transmission on the data link.

5.Connect the fixtures to the mains.

6.See chapter "Stand-alone mode" in order to set the fixture as a master or slave.