3M Static Monitor 790 Kullanıcı Kılavuzu - Sayfa 6

Ölçüm Cihazları 3M Static Monitor 790 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 3M Static Monitor 790 19 sayfaları.

b. If you are grounding the 3M

Ground Cord perform the following steps:

• Attach one of the supplied Chassis/Ground Cords (tinned end) to the

ground terminal of the two-wire connector by inserting it into the

opening and securing with screwdriver.

• Attach the other Chassis/Ground Cord to the chassis terminal of the two-

wire connector in the same manner.

• Attach the ring terminal ends of both cords separately with two screws

(not supplied) to an earth/electrical ground.

• Plug the two-wire connector into the jack at the rear of the Static

Monitor 790.

CAUTION

When using two Chassis/Ground Cords, attach each of the cords to separate ground bonding

points. By attaching the cords to the same ground but at different physical locations, the monitor

can check for loose or lost connections.

Static Monitor 790 Connected

™

Directly to Ground

AC Adapter

Ground Wire

or Chassis/Ground

Cord

Figure 3A and 3B - 3M

™

Rear of 790 Monitor

Chassis/Ground

Cord

Electrical Ground

Static Monitor 790 Connected Directly to Ground or Through Equipment Chassis Ground

Static Monitor 790 through a Chassis/

Static Monitor 790 Connected through

™

Equipment Chassis Ground

AC Adapter

Ground Wire

or Chassis/Ground

Cord

Chassis/GroundCord

Existing Equipment

Ground Wire