Anova C1064 Montaj Talimatları
Dış Mekan Mobilyaları Anova C1064 için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Anova C1064 2 sayfaları.
Sayfayı Yazdıranovafurnishings.com
888.535.5005 tel
tools neeDeD:
•
1/2" Open-end or Box-end Wrench
•
Ratchet with 1/2" Socket
•
Level
Assembly HArDwAre:
8 x
8 x
5/16" X 1.5"
5/16"
Hex Head Bolt
Flanged Hex Nut
Assembly:
The assembly is a two-person operation.
1. Inspect the shipping container contents for damage and to determine that all components and hardware are present.
2. Place the Bench Supports and one of the
Bench Seats on the shipping packaging or
other soft surface to avoid scratching the
product.
3. Align the mounting holes in one of the
Bench Supports with the holes in the
appropriate end of the Bench Seat. Install
a Washer onto one of the provided Bolts
and insert the Bolt through both parts,
with the Bolt head on the outside surface
of the Bench Support. Install a Washer and
Nut on the inside end of the Bolt.
Leave the hardware finger tight so
that adjustments can be made during
assembly.
Install a Bolt and Washer through the
other set of mounting holes in that end
of the Bench Support and Seat and install
a Washer and Nut. Again, leave the
hardware finger tight.
4. Attach the other Bench Support to the Bench Seat as shown. Leave the hardware finger tight.
ASI 120E HRD1 S105
Assembly InstructIons
F1051
6 ft Rolled Edge Bench
F1054
8 ft Rolled Edge Bench
F1061
6 ft Victory Bench
F1064
8 ft Victory Bench
F1337
6 ft Victory Bench - Deep Seat
F3043
4 ft Victory Bench - Deep Seat
F3049
8 ft Victory Bench - Deep Seat
D1061
6 ft Victory Bench
D1061com
6 ft Victory Bench with Plaque
D1064
8 ft Victory Bench
c1061
6 ft Identity Bench
c1064
8 ft Identity Bench
bencH components:
16 x
5/16"
Washer
2 x Bench Supports
Model F1064 shown.
Seat pattern may vary.
2 x Bench Seat
Bench Seat
Washer
Nut
Bench Back
Bench
Support
Bolt
Washer
Bench
Support