3M TN201 Güvenlik ve Kurulum Talimatları - Sayfa 5

Ölçüm Cihazları 3M TN201 için çevrimiçi göz atın veya pdf Güvenlik ve Kurulum Talimatları indirin. 3M TN201 8 sayfaları. Wheel weight system

Technical Update

3M™ Wheel Weight System TN2000 – Safety and Instructions

Page 5 of 8

3M™ Dual Box Holder Kit TN222 (PN99428) and 3M™

Dual Cutter Bracket TN211 (PN99429)

Set-Up and

1) Remove 3M™ Universal Cutter

Instructions

2) Insert dual cutter bracket onto blue

3) From the bottom side of the

TN201 (PN61479) from the 3M™

Cutting Stand TN252 (PN61480).

Loosen socket head cap screws

(A), with a 5/32" allen wrench and

remove. Set cap screws aside for

later use. Remove metal collar

from tube with a 3/16" allen

wrench. Recycle metal collar.

stand orienting roughly as shown in

photo, with hex nuts facing rear

and cutter slots oriented horizontal

to floor. Tighten hex nuts with

7/16" box wrench. This may need

to be adjusted later for operator

comfort.

bracket, insert one cutter into the

right side slot as shown. Secure

with two supplied socket head cap

screws (A) using a 5/32" allen

wrench as shown.