Anova CC400P Kullanıcı El Kitabı - Sayfa 4

Çim Biçme Makinesi Anova CC400P için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Anova CC400P 14 sayfaları.

Sayfayı Yazdır

and lift only the part which is away from the operator,

p) do not start the engine when standing in front of the discharge chute;

q) do not put hands or feet neat or under rotating parts. Keep clear of the discharge opening at all

tines;

r) never pick up or carry a lawnmower while the engine is running;

s) stop the engine and disconnect the spark plug wire;

- before clearing blockages or unclogging chute;- before checking, cleaning or working on the

lawnmower,

- after striking a foreign object lnspect the lawnmower for damage and make repairs before

restarting and operating the lawnmower,

- if lawnmower starts to vibrate abnormally(check immediately);

t) stop the engine:

- whenever you leave the lawnmower,

-before refuelling;

u) reduce the throttle setting during engine shut down and, if the engine is provided with a shutoff

valve, turn the fuel off at the conclusion of mowing;

Maintenance and storage

a) Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition;

b) never store the equipment with petrol in the tank inside a building where fumes can reach an

open flame or spark;

c) allow the engine to cool before storing in any enclosure;

d) to reduce the fire hazard, keep the engine, silencer, battery compartment and petrol storage area

free of grass, leaves, or excessive grease;

check the grass catcher frequently for wear or deterioration;

f) replace worn or damaged parts for safety;

g) if the fuel tank has to be drained, this should be done outdoor;.

SYMBOLS

The following symbols can be found on the machine to remind you of the care and attention that are

required during use. The symbols mean:

Read

Operator's

Manual.

Keep

Bystanders

Away.

Remove Objects that could

Be thrown by the blade.

DANGER – Rotating

blades. Keep hands

and feet out of

Openings while

Machine is running.

Before you work on

the cutting equipment,

remove the spark plug

socket.

Warning!Keep hands and

feet clear of the cutting

deck when the machine

is running.

Warning!Before starting

any repair work,remove

the spark plug cable

from the spark plug.

Warning!Keep other persons

at a safe distance when

using this lawnmower.