Anova TPB3003 Kullanıcı Kılavuzu - Sayfa 7
Çim ve Bahçe Ekipmanları Anova TPB3003 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Anova TPB3003 11 sayfaları. Battery pruning scissors
Sayfayı Yazdır5. Do not use damaged batteries or disassemble the charger or batteries.
6. Batteries can explode in fire. Never burn the batteries.
7. Do not charge the batteries in an outdoor or humid environment.
8. With the gradual decrease of the electric quantity of the battery, it is normal to reduce the capacity of
the cutting diameter.
9. During the charging process, do not use electric pruning shears.
3.5 Sharpening the blade
1. Turn the scissor off with the blade open and remove the battery.2. Both sides of the movable knife are
sharpened using sharpening stone forming the section angle with the knife; 3. After sharpening the
blade, clean it, connect and turn on scissors, test that it moves properly, and close the blade for future
work.
3.6 Blade replacement
1. To ensure your safety, remove the battery before handling the blade.2. Step by step, as shown below,
replace the blade. 3. After replacement, clean the blade, turn on the scissors and test to see that
everything is correct.
1. Remove the screws with a screwdriver and open the cover.2. Remove the screws from the blade nut
retainer (this step is important) 3. Remove the blade nut
4. Remove the pin and remove the movable knife5. Remove the fixed knife.
6. When replacing blades, lubricating oil should be added between blades
7. Replace blade8. Insert nut 9. Install the lock nut
Support blade and movable blade can be replaced independently; As a replacement, don't worry
about too small a blade opening; After recovering the electricity from the scissor, the normal opening
size will automatically recover.