Airthings Wave Kullanıcı Kılavuzu - Sayfa 2

Güvenlik Sensörleri Airthings Wave için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Airthings Wave 2 sayfaları. Smart radon detector
Ayrıca Airthings Wave için: Kullanım Kılavuzu (7 sayfalar), Kullanım Kılavuzu (7 sayfalar)

Sayfayı Yazdır

Install and run setup in app

You may use your Airthings Wave stand-alone,

but the free Airthings app for smartphones and

tablets will provide a richer user experience and

more insight.

The app is easy to install and use.

1 Download and open app

2 Create an account

3 Follow instructions

For supported smart phones and tablets

go to the support section on:

support.airthings.com/

Easy to Mount

Window/

min. 1m / 3 ft

vent

Fix the mounting bracket to the ceiling or wall. Make sure you use

appropriate screws for your wall type. The screws included are intended

for wood or concrete walls. Do not place it close to vents or windows.

Minimum 1 meter / 3 feet distance.

Thanks to the built-in magnet, simply snap the unit onto the mounted

bracket. Then rotate it to the desired position.

Wave in front of the detector to test the Wave function.

What does the color mean?

Spinning: Ready to pair.

Flashing: Paired.

Waiting for first result.

Air quality is good.

Warning.

Above recommended level,

keep on measuring.

Danger.

Above recommended level and action

should be taken to lower your radon level.

Daily use

Wave in front of your detector and a light ring will glow for a few

seconds to indicate your radon levels.

Risk

Indicator

Humidity

The blue light is used to display Bluetooth status. When it is spinning blue, the

device is ready for pairing and it will stay in that mode for 1 minute. Knock gently on

Blue

the detector to restart pairing process or check status. If your detector has already

been paired, blue light will flash twice.

After a successful setup it takes 1 hour until the first radon measurement is available.

White

Your radon level is below the recommended level. If you have paired the

device to a smart phone or tablet and given it the correct location, it will use the

Green

national recommended level. If no pairing or location is set it follows the WHO

guidance, which is 100Bq/m

You will get a yellow light if your levels have been above the recommended level,

but a longer measurement is needed to get a qualified measurement.

Yellow

Measurements are above the recommended level. Actions should be taken to lower

radon levels.

Red

Make sure you always

have Bluetooth enabled

on your phone and

the App running in the

background. Every time

you move within 10-15

meters / 30-50 feet of

your device, the latest

data will be download-

ed automatically.

Select your

Temperature

Airthings Wave

graph

Radon level

Tempera-

Selected

(last 24 hours)

ture

value

indicator

For the U.S.A. radon levels are shown in pCi/L

(2.7 pCi/L).

You will be

notified if

any actions

are needed

through the

app or by

email.

Radon

Humidity

graph

Select

time

interval

Graph with

Average

historical

value

values

indicator