DS Services of America 300m Series Kullanıcı El Kitabı - Sayfa 5

Su Sebili DS Services of America 300m Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. DS Services of America 300m Series 7 sayfaları. Pure water dispenser

Sayfayı Yazdır

5. Remove separator by pulling straight out.

SPILL-PROOF

dispenser insert

Separator

Reservoir

6. Clean spill-proof dispenser insert and separator with warm, soapy water or on top rack of dishwasher.

7. Allow these parts to dry thoroughly.

8. Wipe inside of reservoir with a soft, clean cloth.

9. Place separator back in dispenser.

10. Replace spill-proof dispenser insert.

11. Install a full water bottle on dispenser (see HOW TO INSTALL AND USE).

12. Plug dispenser into the power supply using a GFCI outlet.

13. Dispense water.

14. Turn on the hot tank heater switch located at the rear of dispenser.

CLEANING CABINET

1. Unplug dispenser from power outlet prior to cleaning cabinet.

2. All plastic parts can be cleaned using a cloth and warm, soapy water. Rinse with clean water. Never use scouring pads, steel

wool or scouring powder.

3. Condenser tubes located on back of dispenser should be vacuumed.