Daintree GE current Lumination LRXEMBBKIT10 Kurulum Kılavuzu - Sayfa 5

Aydınlatma Ekipmanları Daintree GE current Lumination LRXEMBBKIT10 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Daintree GE current Lumination LRXEMBBKIT10 6 sayfaları. Led luminaire

Sayfayı Yazdır

Lumination

(LRX - Series)

Lumens Setting Switch

NOTE: Forr 1000/650lm product, default output lumen is 1000lm. Push switch up or left to activate 650lm. For 4000/3000lm product, default

output level is 4000lm.

6" and 8"

Remove nut from

test switch

Remove nut from

test switch

Attach the test switch to the LRX EMBB fixture or junction box. If the fixture is 6" or 8", first remove the nut from the end of test switch,

and put test switch through the hole of fixture, then thread nut to test switch. If the fixture is 4", mount to the junction box and provided

flexible conduit for remote mounting of the test switch.

NOTE: For phase cut dimming product, dimming leads (violet and gray wires) are disconnected.

Connect the quick connector of LRX EMBB fixture and LRXEMBBKIT07( or LRXEMBBKIT07HE, or LRXEMBBKIT10)

and close quick connector box well.

NOTE: For phase cut dimming product, dimming leads (violet and gray wires) are open.

6" and 8"

Attach to housing

6" and 8"

Tighten nut on

inside of housing

Tighten nut on

inside of housing

Installation Guide

Box closed