Daintree GE current Lumination RC Series Kurulum Kılavuzu - Sayfa 6

Aydınlatma Ekipmanları Daintree GE current Lumination RC Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Daintree GE current Lumination RC Series 8 sayfaları. Led luminaire

Sayfayı Yazdır

Lumination

RC/LRC/RXLRX Series

LRX Series Mounting

Connect conduit end with input leads to existing

junction box and make proper connections. Connect

the black, white and green/yellow wire of the input

leads to the black, white and green wires using twist-on

wire connectors and close junction box.

Optional dimmer: When connecting a dimming

controller, wires must be run through another separate

knockout hole. Connect the violet (dimming +) and

gray (dimming - ) wires to the violet and gray wires of

the fixture.

Note: Cap unused dimming leads with wire nuts

Adjusting Lumen Output

(for compatible fixtures only)

Note:

For 1000/650lm luminaires, the default lumen output is 1000lm. Push the switch up to activate the 650lm setting.

For 4000/3000lm luminaires, the default lumen output is 4000lm. Push the switch up to activate teh 3000lm setting.

For dimming device compatibility for 0-10V and phase

cut dimming, please refer to:

www.gecurrent.com/dimming

Installation Guide